Laser welding finned tube is processed by laser welding machine. Laser welding is a welding method that irradiates a high-intensity laser beam onto the metal surface. Through the interaction of the laser and the metal, the metal absorbs the laser light and converts it into heat, melting the metal to form a cooling crystal. Laser welding machine is the most advanced laser welding equipment for finned tubes. Because the welding process is fully automatic and mechanical, the scientific and technological content and quality of laser welding finned tubes are superior to traditional cooling tubes.
The laser welding finned tube has a fully automatic welding process, saving manpower costs; secondly, the laser welding fin is firm, strong, and the test with high tensile strength is qualified. Laser welding is more efficient.
Advantages of laser welded finned tube
- The laser welding finned tube (finned tube) fin machine has a high degree of automation, and the welding of the fin to the tube and the winding of the tube are synchronized
- 100% welding rate, laser welding finned tube and fins are strong, the welding strength exceeds 600MPa.
- The precision of laser welding tube finishing machine is up to 0.05mm
- 0 contact resistance, achieve high efficiency of heat transfer of spiral finned tube by laser welding.
- Save production costs. The laser welding finned tube (finned tube) has a smaller fin spacing, less than 2.5mm. Compared with the high frequency welded spiral (spiral) finned tube, the heat transfer area is increased by about 50%, which makes the material cost Reduced, volume reduced heat exchanger.
The advantages over conventional MAG / HF welding are of decisive importance. The complete connection between the fin and the base tube brings excellent heat transfer, and the thermal performance of the fin tube is increased by 2.5 times. Continuous welding prevents the notch effect, thereby avoiding the formation of v-corrosion and cracks under the condition that the finned tube may swing. The heating of base metals during welding is low and the travel speed is up to 20m / min. Minimize the heat affected zone in the base tube.
Power Plants
- Cooling towers or cooling water recooling plants with dry, dry / wet or wet operation
- Flue gas cooling and heating in flue gas desulfurisation scrubbers (FGD) and nitrogen removing plants (DENOX)
Chemical Industry
- Heat exchangers of all kinds for cooling and heating of liquids and gases
- Heat exchangers tor nitric acid (HNO3) plants, e.g. for the fertilizer industry
Heat Recovery Plants
- Flue gas coolers
Heating Industry
- Primary heat exchangers in gas heating boilers
- Secondary heat exchangers for domestic water heating in condensing boilers
General Engineering
- Heat exchangers for gas cooling of industrial furnaces
- Heat exchangers for tank heating
- Oil coolers for vacuum plants, ship plants, pumps etc.
- Heat exchangers for oil preheating
Dimensions
- Tube outside diameter 8.0–50.0 mm
- Fin outside diameter 17.0 –80.0 mm
- Fin pitch 5 –13 fin/inch
- Fin height 5.0 –17 mm
- Fin thickness 0.4 – 1.0 mm
- Maximum tube lengths 12.0 m
Pre-sales service
Inquiry and consulting support.
Sample testing support.
Visit our factory
Company name: Cangzhou Datang Steel Pipe Co., Ltd
Address: Cangzhou City, Hebei Province, China
Contacts: Howie Li
Whatsapp Number: 0086 15530722107
Email: datangfintube@gmail.com
Looking forward to receiving your inquiry, I will offer you a very reasonable price.
Any questions, I will reply you within 24 hours.