For the knowledge of finned tube radiators, the following editor will explain its maintenance and what needs to be paid attention to, so that everyone can use the finned tube radiators better.

Maintenance content mainly includes the following:

1. The finned tube radiator cannot be in contact with corrosive substances such as acid and alkali, so as to avoid damage caused by corrosion.

2. Soft water is used as the coolant. If hard water is used, it must be treated first before use to avoid clogging caused by scale inside the product.

3. If antifreeze is used, it must be of qualified quality to avoid damage to the equipment.

4. During the installation of the equipment, care should be taken not to damage the finned tubes, heat dissipation strips, etc., so as not to affect its heat dissipation capability and make it unable to use normally.

5. Wait until the water in the equipment is exhausted before injecting water to avoid blisters in the equipment.

6. During the use of the equipment, it is necessary to check the water level frequently, whether it is necessary to add water, etc. If necessary, it should be done in time, but be careful not to add too much water.

7. If the equipment is not used for a long time, the internal water should be drained, and there should be no accumulated water, especially in winter, to prevent it from being damaged by freezing.

8. The finned tube radiator should be cleaned regularly to clean up the internal dirt so that it can work smoothly and normally.