G’ Fin Tubes or Embedded Fin Tubes are mainly used in air fin coolers and many different types of air-cooled radiators. These types of ‘G’ Fin Tubes mainly find application in areas where the temperature for heat transfer is in a slightly higher range. The Embedded Fin Tubes are mainly used in places with higher temperature and where the working atmosphere is relatively less corrosive to the base tube.
Main industries in which the ‘G’ Fin Tubes find service are Process Chemical Plants, Refineries, Gas Processing Plants, Steel Plants, Power Plants, Fertilizer Manufacturing Plants, etc.
Fins Per Inch:5-13 FPI
Fin Height:0.25″ to 0.63″
Fin Material: Cu, Al
Tube OD:0.5″ to 3.0″ OD
Tube Material:Cu, CuNi, Br, Al, SS, CS, Ni, Ti
Max Process Temperature:750 °F
Finned Tube—-G-Type Fintube / Embedded Fintube
A spiraling groove zero.2-0.3 mm (0.008-0.012 in) is plowed into the surface of the base-tube wall such metal is just displaced, not removed. The metal fin is wound automatically into the groove beneath tension, once that the displace metal is rolled back on all sides of the fin to carry it in situ. that’s why this sort is additionally referred to as embedded finned tube. The emotive thickness of the base-tube wall is that the thickness at a lower place the groove. this sort provides wonderful contact, each thermal and mechanical, between fin and groove. though the base-tube metal is exposed to the atmosphere, tests beneath server conditions showed that corrosion over an extended amount is needed before any bond weakness happens.
The G-type fin tube is applicable to warmth up to 750 F degree (450 C degree)
Application:
Oil and gas refineries
Petroleum, chemical and organic compound industries
Natural gas treatment
Steel creating trade
Power plants
Air acquisition
Compressor coolers
Advantages:
High fin stability, wonderful heat transfer, high operative temperature.
The fin/tube wall contact is constant as a result of the setting and makes it attainable to use a wall temperature of up to 450°C.
The fin is ready throughout its length and consequently doesn’t unwind even once partly uprooted.
This kind of finned tube is one amongst optimum selections for having smart effectiveness/cost magnitude relation.
Weakness:
The fin isn’t therefore sturdy to resist mechanical injury once external forces applied on fin space
Handling shall be through with care to avoid any injury.
Finned tubes is also broken whereas victimisation either steam or aggressive water for cleansing
As the fins square measure helically wrapped in grouves, un-finned space isn\’t lined which may be exposed to corrosive media and galvanic corrosion at the bottom of the fins may be accumulated
Tube shall be straight with disembarrass facet space to create a decent finned tube
It is onerous to use core tube once more once finning is unsuccessful.
Fins ought to be mounted at each ends avoiding un-wrapping